Technical Data - Makita LD080PI Instruction Manual

EN

Technical Data

Distance measurement
Typical Measuring Tolerance* ± 1.5 mm / 0.06 in ***
Maximum Measuring
Tolerance**
Range of target plate
Typical Range*
Range at unfavourable
condition ****
Smallest unit displayed
Ø laser point
at distances
Tilt measurement
Measuring tolerance to laser
beam*****
Measuring tolerance to
housing*****
Range
General
Laser class
Laser type
Protection class
Autom. laser switch off
Autom. power switch-off
Battery durability (2 x AAA)
Dimension (H x D x W)
Weight (with batteries)
Temperature range:
- Storage
- Operation
16
* applies for 100 % target reflectivity (white painted
wall), low background illumination, 25 ºC
** applies for 10 to 500 % target reflectivity, high back-
± 2.5 mm / 0.10 in ***
ground illumination, - 10 ºC to + 50 ºC
*** Tolerances apply from 0.05 m to 10 m with a confi-
80 m / 262 ft
dence level of 95%. The maximum tolerance may
deteriorate to 0.1 mm/m between 10 m to 30 m and to
80 m / 262 ft
0.2 mm/m for distances above 30 m
60 m / 197 ft
**** applies for 100 % target reflectivity, background
illumination of approximately 30'000 lux
0.1 mm / 1/32 in
***** after user calibration. Additional angle related
6 / 30 / 50 mm
deviation of +/- 0.01° per degree up to +/-45° in each
(10 / 50 / 80 m)
quadrant. Applies at room temperature. For the whole
operating temperature range the maximum deviation
increases by +/- 0.1°.
± 0.2°
± 0.2°
For accurate indirect results, the use
of a tripod is recommended. For
360°
accurate tilt measurements a trans-
verse tilt should be avoided.
2
635 nm, < 1 mW
IP54 (dust- and splash
water protected)
after 90 s
after 180 s
up to 5000 measure-
ments
117 x 57 x 32 mm
4.6 x 2.4 x 1.3 in
0.14 kg / 4.938 oz
-25 to 70 °C
-13 to 158 °F
-10 to 50 °C
14 to 122 °F
Makita LD080PI
Functions
Distance measuring yes
Min/Max measuring yes
Permanent measuring yes
Stake-out yes
Addition/Subtraction yes
Area yes
Volume yes
Pythagoras 2-point, 3-point,
partial height
Smart Horizontal Mode / yes
Indirect height
Height tracking yes
Levelling yes
Memory 20 displays
Beep yes
Illuminated display yes
Multifunctional endpiece yes