Graphic Eq Operations; About The Graphic Eq; Inserting A Geq In A Channel - Yamaha CL1 Reference Manual

• CH 65–72.................................... CH 65–72
• INSERT IN 1–32 ....................... CH 1–32
• INSERT IN 33–64..................... CH 33–64
• INSERT IN 65–72..................... CH 65–72
• INSERT IN MIX/MATRIX..... MIX 1–24, MATRIX 1–8
• INSERT IN ST/MONO............ STEREO L/R, MONO
*1. Not displayed for GEQ 1-16 RACK.
*2. Not displayed for PREMIUM 3–8 RACK. Displayed only for PREMIUM 1–2 RACK.
NOTE
• In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
• If you use CL5 settings data on the CL3/CL1, or CL3 settings data on the CL1, buttons will be
shown crossed-out if they are assigned to a channel that does not exist on that model.
2
Channel select buttons
Use these buttons to select the output destination.
3
CLOSE button
Closes the popup window.
7.
To switch Recall Safe on/off for each rack, press the SAFE button for that rack.
If Recall Safe is turned on for a rack, the contents and parameters of that rack will not change
when a scene is recalled. For more information on Recall Safe,
on page 88.
Be aware that the Recall Safe settings of each rack will not preserve the input/output patching to
that rack. Recall Safe settings for patching must be made on the input-source or output-
destination channel.
NOTE
The type of GEQ, effect, or premium rack mounted in each rack, its parameter settings, and the
input-source and output-destination patch settings are saved as part of the scene.
*1, *2
*1
*1
*1
"Using the Recall Safe function"

Graphic EQ operations

About the graphic EQ

The CL series console enables you to mount a GEQ in GEQ racks 1–16 and patch it to the insert-out
and insert-in of a MIX/MATRIX channel or STEREO/MONO channel. You can also mount it in
EFFECT racks 1–8 (FX 1–8) and patch it to the insert-out/in of an input channel, MIX/MATRIX
channel or STEREO/MONO channel. The gain of each band can be adjusted using the faders and [ON]
keys in the Centralogic section.
The following two types of GEQ are provided.
■ 31BandGEQ
This is a monaural 31-band GEQ. Each band is 1/3 octave
wide, the adjustable gain range is ±15 dB, and the gain of
all thirty-one bands can be adjusted.
If a 31BandGEQ is mounted in a rack, one channel of input
and output can be used for that rack.
■ Flex15GEQ
This is a monaural 15-band GEQ. Each band is 1/3 octave
wide, and the adjustable gain range is ±15 dB. The
Flex15GEQ enables you to adjust the gain for any fifteen of
the same bands as the thirty-one bands of the 31bandGEQ.
(Once you have used up fifteen bands of adjustment, you
will not be able to adjust the gain of another band until you reset a previously-adjusted band to the flat
setting.)
A rack for which the Flex15GEQ is selected will have two Flex15GEQ units (shown as "A" and "B"
respectively) mounted in that rack, and will allow two channels of input and output. If you mount a
Flex15GEQ in each rack, you will be able to use up to 48 GEQ units simultaneously.

Inserting a GEQ in a channel

This section explains how to insert a GEQ into the selected channel for use.
1.
Refer to steps 1–6 in the "Virtual rack
GEQ in a rack and set its input source and output destination.
The rack shown in the GEQ field indicates the approximate GEQ settings and the input and
output levels. A rack in which a Flex15GEQ is mounted will show information for two GEQ units
(A and B).
NOTE
If you are using a stereo source, you can mount a Flex15GEQ, or mount two 31BandGEQ units
in adjacent odd-numbered/even-numbered racks. This will let you link the two GEQ units in a later
step.
118
Graphic EQ, effects, and Premium Rack
INPUT OUTPUT
Rack
31BandGEQ
INPUT OUTPUT
Rack
Flex15GEQ (A)
Flex15GEQ (B)
operations" on page 115 section to mount a
Reference Manual