Makita BFL300F Instruction Manual
Cordless angle screwdriver
Hide thumbs
Also See for BFL300F:
- Instruction manual (65 pages) ,
- Technical information (13 pages) ,
- Instruction manual (17 pages)
Related Manuals for Makita BFL300F
Summary of Contents for Makita BFL300F
- Page 1 INSTRUCTION MANUAL Cordless Angle Screwdriver BFL300F BFL400F BFL401F 005735 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
EN60745: Work mode: screwdriving without impact Vibration emission (a ) : 2.5 m/s or less For Model BFL300F Uncertainty (K) : 1.5 m/s ENG104-1 ENG901-1 For European countries only The declared vibration emission value has been •... - Page 3 Unmodified plugs and matching outlets will Cordless Angle Screwdriver reduce risk of electric shock. Model No./ Type: BFL300F, BFL400F, BFL401F Avoid body contact with earthed or grounded are of series production and surfaces such as pipes, radiators, ranges and Conforms to the following European Directives: refrigerators.
-
Page 4: Screwdriver Safety Warnings
13. Remove any adjusting key or wrench before one type of battery pack may create a risk of fire turning the power tool on. A wrench or a key left when used with another battery pack. attached to a rotating part of the power tool may 25. -
Page 5: Important Safety Instructions
Charge the battery cartridge with room WARNING: temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F). MISUSE or failure to follow the safety rules stated in Let a hot battery cartridge cool down before this instruction manual may cause serious personal charging it. -
Page 6: Functional Description
FUNCTIONAL DESCRIPTION Reversing switch action 1. Reversing CAUTION: switch lever Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. Battery cartridge 2. - Page 7 LED indicator / Beeper functions. Led indicator / Beeper on the tool shows the following Status of the LED indicator/beeper Function Status Action to be taken LED indicator Beeper This function works when the tool has reached the preset fastening torque and normal Auto-stop fastening tightening has been completed.
-
Page 8: Operation
Adjusting the fastening torque Rotate the ring in front of the tool and then tighten the screw to secure the ring. 1. Screw NOTE: Numbers on the fastening torque scale is a • guideline to set up your desired fastening torque. ASSEMBLY CAUTION: 005750... -
Page 9: Maintenance
Only use accessory or Torque attachment for its stated purpose. 010277 If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Various type of Makita genuine batteries and • chargers Automatic refreshing adapter •... - Page 10 Switch lever set • Spindle complete 12.7 •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884551C225...