Check The Operation Of The Spa112; Registration And Account Activation; Phone Operation; Check Ringing - Cisco spa112 Setup & User Manual

3 Check the operation of the SPA112

3.1 Registration and Account activation

Check the Phone 1 and Phone 2 lights on the Cisco, for one subscription on the Cisco you
should have one light, and 2 lights for 2 subscriptions.
Logon to www.telephony-cloud.com. Your username and password are on MySettings
Sheet
You should see the phone displayed in Blue and Mauve as below.
If you hover over the phone the tool tips show the IP address and the time of the last
registration.
There should be a small "p" below the phone to indicate that the Cisco is using the
Jaguar Telecom Outbound Proxy Server.

3.2 Phone Operation

Dial 1451
You should hear a message with technical details about your Phone

3.3 Check Ringing

Phone the number from a normal phone to check that ringing is operational.
If the phone does not ring, check if you need a master phone adaptor and try an
alternative phone

3.4 Finished

You may now enjoy your new service, there is no need to read beyond this page.

4 Trouble Shooting

4.1 SPA112 Lights

The Power, Internet and at least one phone light must be on solid for successful
operation of the unit.

Power Light (far left)

Off
Unit has no power
•
Solid light
Unit operating properly
•
Copyright © 2005-2012 Jaguar Telecom Version 1.8 Page 6 of 8