Connecting To The Console Port - Cisco 2600 series Installation Manual

Chapter 3 Installing the Router

Connecting to the Console Port

To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console
port on the router:
Connect the terminal using the blue RJ-45-to-RJ-45 console cable and an RJ-45-to-DB-9 adapter
Step 1
(labeled TERMINAL) or the blue RJ-45-to-DB-9 adapter cable. (See
Figure 3-27 Connecting a Console Terminal
Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no parity, and
Step 2
2 stop bits.
For information on console port pinouts, refer to the online document Cisco Modular Access Router
Note
Cabling Specifications on Cisco.com and the Documentation CD-ROM that accompanied your
router.
OL-2171-02
SERIAL 1
SERIAL 0
CONN WIC
CONN 2A/S
CONN
SEE MANUAL BEFORE INSTALLATION
SEE MANUAL BEFORE INSTALLATION
LINK ETHERNE T 1
ACT
LINK ETHERNE T 0 ACT
CONSOLE
Console port (RJ-45)
RJ-45 to RJ-45
rollover cable
RJ-45-to-DB-25 adapter
SERIAL 1 Cisco 2611
100-240V – 1A
50/60 Hz 47 W
SERIAL 0
WIC
CONN
2A/S
W0
AUX
Laptop computer
RJ-45 to DB-9 or
Cisco 2600 Series Routers Hardware Installation Guide
Connecting to a Network
Figure 3-27.)
3-21