Table of Contents
Advertisement
The top lamp
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quick-
ly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows an error
code that is not in this table.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
www.zanussi.com
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is ac-
tivated.
The Child Lock is on.
The fuse is released.
The lamp is defective.
The temperature is too low or
too high.
You left the dish in the oven for
too long.
There is an electrical fault.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
Remedy
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Adjust the temperature if nec-
essary. Follow the advice in
the user manual.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
•
Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
•
If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
21
Advertisement
Table of Contents
