Removing And Replacing The Warming Drawer - Samsung NE59J7650 SERIES User Manual

Hide thumbs Also See for NE59J7650 SERIES:
Table of Contents

Advertisement

Available languages

Available languages

3.
Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4.
Push the hinge locks up against the front frame of the oven cavity to the
locked position.
Unlocked position
5.
Close the oven door.

Removing and replacing the warming drawer

CAUTION
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1.
Pull out the drawer until it stops.
2.
Locate the locking clips near the back of each full-extension roller guide rail.
Using two hands, push down on the left clip and lift up on the right clip to
release the clips. Pull the drawer the rest of the way out.
Hinge lock
3.
Pull the warming drawer away from the range.
Locked position
How to replace the warming drawer
Lever
Push down on the
left guide
1.
Position the ends of the full-extension
roller guide rails in the side rails of the
drawer opening.
2.
Push in the drawer to close it and snap
the locking clips into place.
Right roller guide rail
Lever
Pull up on the right
guide
English 45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ne59j7651 series

Table of Contents