Dell S2830dn User Manual page 69

Understanding the printer menus
Use
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255 sec
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
To
Set the amount of time in seconds that the printer waits to
receive an end‑of‑job message before canceling the job.
Notes:
•
90 is the factory default setting.
•
When the timer expires, a partially printed page that is
still in the printer is printed.
•
Print Timeout is available only when using PCL
emulation. This setting has no effect on PostScript
emulation print jobs.
Set the amount of time in seconds that the printer waits for
additional data before it cancels a print job.
Notes:
•
40 is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Set the printer to restart when an error occurs.
Notes:
•
Reboot always is the factory default setting for Auto
Reboot.
•
2 is the factory default setting for Max Auto Reboots.
•
When the same error occurred after a set of automatic
reboots, the printer no longer restarts and shows the
error instead.
Let the printer automatically continue printing from certain
offline situations.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
Set the printer to check automatically for jammed paper.
Note: On is the factory default setting.
69