Table of Contents
Advertisement
Understanding the printer menus
Reports menu
Use
To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.
Network Card menu
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0–255 seconds
Banner Page
Off
On
TCP/IP menu
Note: This menu is available only in network printers or printers connected to print servers.
Use
Set Hostname
IP Address
Netmask
Gateway
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Enable banner pages.
Note: Off is the factory default setting
To
Set the host name.
Notes:
•
This setting can be changed only from the Embedded Web Server.
•
The host name can be up to 15 characters and can be a US‑ASCII or
alphanumeric character, or hyphen.
View or change the current TCP/IP address.
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto
IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on
systems that support BOOTP and RARP.
View or change the current TCP/IP netmask.
View or change the current TCP/IP gateway.
57
Advertisement
Table of Contents
