Dell S2830dn User Manual page 114

Troubleshooting
Load [paper source] with [paper type] [paper size] [orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that
tray. If the printer cannot find a tray that has the correct size and type of paper, then it prints from the
default paper source.
•
Cancel the current job.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, press
•
Decrease the resolution setting.
•
Install additional printer memory.
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
•
Check if the toner cartridge is missing. If missing, install the toner cartridge.
For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide.
•
If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace
the toner cartridge.
Reinstall missing or unresponsive imaging unit [31.xy]
Try one or more of the following:
•
Check if the imaging unit is missing. If missing, install the imaging unit.
For information on installing the imaging unit, see the "Replacing supplies" section of the User's Guide.
•
If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging unit is defective.
Replace the imaging unit.
Replace cartridge, 0 estimated pages remain [88.xy]
Replace the toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement cartridge, then visit our Web site or contact the place where you
purchased the printer.
to clear the message and continue printing.
to clear the message.
114