Set Up Geofencing - NETGEAR Arlo Wire-Free User Manual

8. For email notifications, make sure that the Email Alerts check box is selected.
9. To specify an email address, click or tap Edit
the email address.
10. Click or tap the Save button.
Your settings are saved.

Set Up Geofencing

A geofence is a virtual fence that helps to discover when something or someone
enters or exits a pre-defined zone. You can use Arlo Geofencing to arm, disarm, or
resume schedule modes, when your mobile device is In Zone or Out of Zone.
To set up geofencing, you must use your mobile device and you must allow the Arlo
app to use your location.
Configure Your Mobile Device
¾ To configure your mobile device for more accurate geofencing:
1. Enable GPS or location services so that Arlo can locate your device.
2. Enable WiFi.
Set Up Geofencing for the First Time and Set Up Modes
¾ To set up geofencing for the first time and set up modes:
1. Tap the Arlo icon
The Cameras page displays.
2. Tap Mode.
A list of cameras displays.
3. Click or tap the camera.
A list of available modes displays.
4. Tap Geofencing.
The Arlo Would Like to Use your Location prompt displays.
5. Tap Allow.
Geofencing works only if Arlo can locate your mobile device. The Location
Address page displays.
Modes, Rules, and Smart Alerts
on your mobile device.
33
next to Email Alerts and enter