Makita 4101RH Technical Information page 3

R
epair
Same as 4101R, except the following items
1) In disassembling Motor housing and Gear housing ( See the illustration below )
a) Loosen Pan head screw M5x8, and detach Cover B.
b) As Lead unit is earthed to Gear housing, remove Pan head screw M4X8.
c) When having removed the screws in three points, Motor housing and Gear
housing are dismantled.
Pan head screw M4x8
Pan head screw M5x8
2) Before attaching, wipe away mud completely so that there may be no gap
between the faces of Gear housing and Motor housing.
3) In Water-proof cover B, make the Machine in the condition of incision depth 0 ,
and remove or attach it as shown in the illustration below.
Place Cover B into Projection (1) of Handle cover , and then put it into
Projection (2) to fix by Pan head screw.
Gear housing
Cramp
Lead unit
Gear housing
Seal rubber
Water-proof cover B
Motor housing
Fan guide
Cover B
Wipe away mud sticking here completely
Motor housing
Base
2
Pan head
screw M5x8
Gear housing
Handle cover
Put Cover B into
the projection for sure.
1