Makita 2416S Instruction Manual page 3

A guard or other part that is damaged should
be properly repaired or replaced.
20. DIRECTION OF FEED. Feed work into a blade
or cutter against the direction of rotation of
the blade or cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Do not leave tool until it
comes to a complete stop.
22. REPLACEMENT PARTS. When servicing, use
only identical replacement parts.
23. In the event of a malfunction or breakdown,
grounding provides a path of least resistance
for electric current to reduce the risk of
electric shock. This tool is equipped with an
electric cord having an equipment-grounding
conductor and grounding plug. The plug must
be plugged into a matching outlet that is
properly installed
accordance with
ordinances.
24. Do not modify the plug provided - if it will not
fit the outlet, have the proper outlet installed
by a qualified electrician.
25. Improper
equipment-grounding conductor can result in
a risk of electric shock. The conductor with
insulation having an outer surface that is
green with or without yellow stripes is the
equipment-grounding conductor. If repair or
Grounding
Pin
000290
and grounded
all local codes
connection of
(A)
Adapter
Grounding Means
(C)
replacement of the electric cord or plug is
necessary,
equipment-grounding conductor to a live
terminal.
26. Check with qualified electrician or service
personnel if the grounding instructions are
not completely understood, or if in doubt as to
whether the tool is properly grounded.
27. Use only 3-wire extension cords that have
3-prong
receptacles that accept the tool's plug.
28. Repair or replace damaged or worn cord
immediately.
29. This tool is intended for use on a circuit that
has an outlet that looks like the one illustrated
in Sketch A in figure. The tool has a grounding
plug that looks like the plug illustrated in
in Sketch A in figure. A temporary adapter, which
and looks like the adapter illustrated in Sketches B
and C, may be used to connect this plug to a
2-pole receptacle as shown in Sketch B if a
properly grounded outlet is not available. The
temporary adapter should be used only until a
the properly grounded outlet can be installed by a
qualified electrician. The green-colored rigid
ear, lug, and the like, extending from the
adapter must be connected to a permanent
ground such as a properly grounded outlet
box.
Metal screw
Cover of Grounded
Outlet Box
Grounding
Pin
3
do not
grounding plugs
(B)
(D)
connect the
and 3-pole