Advertisement
RM7800L1087; RM7840G1022,L1075; EC7840L1014 RELAY MODULES WITH VALVE PROVING
1. Scroll down until the "Setup" is displayed in the second
line. (Setup is only available when the control is in
Standby or Lockout state.)
Edit:
-
Fig. 9. STANDBY/Setup screen.
2. Enter the Setup submenu by pressing the far right key on the
display. Note that the second line now reads "BC Password".
Edit:
-
Fig. 10. Password screen.
3. Use the +/- buttons to enter the first number—7.
4. Use the far right key to shift over one space.
5. Use the +/- buttons to enter the second number—8.
6. Press Enter (left/right arrow simultaneously).
Edit:
-
Fig. 11. Select/Restart screen.
7. To get to the next screen, press the down arrow. "Get-
ting Data" will be displayed, then the following screen.
Edit:
-
Fig. 12. SETUP: Valve Prove screen.
NOTE:
This screen sets up when to do the Valve Proving Test.
66-1162—2
+
M22662B
+
M22663B
+
M22764B
+
M22664B
8. Use the up/down arrows to select from Never, Before,
After, Both, or Split, then press ENTER.
NOTE: Use Never (as shipped) on initial startup so gas line
purging and System Checkout can be performed.
Then come back to set final operation configuration.
Be sure to conduct final VPS System checkout when
Setup is complete.
Edit:
-
Fig. 13. Save Changes screen.
9. Use the down arrow to save changes. After pressing the
down arrow, "Getting Data" is displayed.
Edit:
-
Fig. 14. Valve Prove time screen.
This screen sets up how long the RM7800L/40L, EC7840L will
conduct the Valve Proving Test for a given time. VP TIme:
00:00 is shown.
10. Enter the appropriate Valve Proving test time from the
worksheet in the appendix.
Use the (+) button to increase time and the (-) button to
decrease. Time changes:
a. 0 to 60 seconds in 1-second intervals.
b. 60 to 600 seconds in 10-second intervals.
c. 10 to 60 minutes in 1-minute intervals.
Press ENTER when correct time is displayed.
Edit:
-
Fig. 15. Save Changes screen.
14
+
M22665B
+
M22666B
+
M22665B
Hide quick links:
Advertisement
