AEG 43172V-MN User Manual page 15

A) Function indicators
B) Time display
C) Function indicator
9.2 Buttons
Button
9.3 Clock functions table
Clock function
Time of day
Minute Minder
Duration
End
You can use the functions
Duration
the same time to set the
time for how long the
appliance should operate
and when the appliance
should deactivate. This lets
you activate the appliance
with a delay in time. First set
the Duration
the End .
9.4 Setting the clock functions
For Duration and End
oven function and temperature of
cooking. This is not necessary for the
Minute Minder .
1. Press again and again until the
indicator for the necessary clock
function starts to flash.
Function
MINUS
CLOCK
PLUS
Application
To set, change or check the time of day.
To set countdown time. This function has no effect on the op-
eration of the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
and End at
and then
, set an
D) Core temperature sensor indicator
Description
To set the time.
To set a clock function.
To set the time.
2. Press or to set the time for the
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function
you set.
For the Minute Minder
function the display shows
the time left.
3. When the time ends the indicator of
the clock function flashes and an
acoustic signal sounds. Press a
button to stop the signal.
4. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
With the Duration
End functions, the
appliance deactivates
automatically.
The functions work only for
the main oven.
ENGLISH 15
and