Embedded Web Server Does Not Open - Dell S5830DN User Manual

Troubleshooting
Action
Step 4
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do vertical voids appear on prints?

Embedded Web Server does not open

Action
Step 1
Make sure the printer IP address is correct.
View the printer IP address:
•
From the printer home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page,
and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
Is the printer IP address correct?
Step 2
Check if the printer is turned on.
Is the printer turned on?
Step 3
Check if the network connection is working.
Is the network connection working?
Step 4
Make sure the cable connections to the printer and print server are
secure.
For more information, see the setup documentation that came
with the printer.
Are the cable connections to the printer and print server secure?
Yes No
Contact technical The problem is
support. solved.
Note: The laser
scanning unit may
be defective.
Yes No
Go to step 2. Type the correct
printer IP address in
the address field of
your Web browser.
Note: Depending on
the network
settings, you may
need to type
"https://" instead
of "http://" before
the printer IP
address to access
the Embedded Web
Server.
Go to step 3. Turn on the printer.
Go to step 4. Contact your system
support person.
Go to step 5. Tighten the cable
connection.
221