Understanding the printer control panel
Understanding the printer control panel
Using the printer control panel
Use the
1
Display
2
Home button
3
Sleep button
4
Keypad
5
Stop or Cancel button Stop all printer activity.
6
Indicator light
7
USB port
Understanding the status of the sleep button and
indicator light
Indicator light
Off
Blinking green
To
•
View the printer status.
•
Set up and operate the printer.
Go to the home screen.
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep Mode:
•
Press any hard button.
•
Pull out Tray 1 or load paper in the multipurpose feeder.
•
Open a door or cover.
•
Send a print job from the computer.
•
Perform a power‑on reset with the main power switch.
•
Attach a device to the USB port on the printer.
Enter numbers, letters, or symbols.
Check the status of the printer.
Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
Printer status
The printer is off or in Hibernate mode.
The printer is warming up, processing data, or printing.
13