Paper Changes Needed - Dell S5830DN User Manual

Troubleshooting
•
Install a flash memory card with larger capacity.
Note: Downloaded fonts and macros not previously stored in the flash memory are deleted.

Paper changes needed

Try one or more of the following:
•
From the printer control panel, select Prompt for each page to continue printing.
•
Select Use current supplies to continue printing using the paper loaded in the tray.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•
From the printer control panel, select Continue to clear the message and continue printing.
The printer discards any data received through the parallel port.
•
Select Reset active bin to reset the bin for a linked set of bins.
Reattach bin [x]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the indicated bin.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the indicated bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
•
Remove the indicated bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the indicated bin.
4
Contact technical support or your Dell printer dealer.
•
From the printer control panel, touch Continue to clear the message and print without using the
specified bin.
181