Preparation For Storage - Makita G SERIES Instructions For Use Manual

10. PREPARATION FOR STORAGE

The following procedures should be followed prior to storage of your generator for
a period of 6 months or longer.
Drain fuel from fuel tank and strainer
■
(cup) carefully by disconnecting the
fuel line. Gasoline left in the fuel tank
will eventually deteriorate making
engine-starting difficult.
In order to remove the fuel in the
■
carburetor, run the engine at no-load
until it stops.
Disconnect the terminal of the battery.
■
Change engine oil.
■
Check for loose bolts and screws, tighten them if necessary.
■
Clean generator thoroughly with oiled cloth. Spray with preservative if
■
available. NEVER USE WATER TO CLEAN GENERATOR !
Store generator in a well ventilated, low humidity area.
■
− 28−
SCREW for DRAIN