Makita G SERIES Instructions For Use Manual page 29

(Periodic Maintenance Schedule table)
Maintenance Items
Clean generator and check bolts and nuts
Check and refill engine oil
Change engine oil (*Note 1)
Replace engine oil filter (*Note 1)
Check battery electrolyte fluid level
Clean spark plug
Clean air cleaner
Replace air cleaner element
Clean fuel strainer
Clean and adjust spark plug and electrodes
Replace spark plug
Spark arrester
Remove carbon from cylinder head
Clean and adjust carburetor
Clean engine base (oil pan)
Check and adjust valve clearance
Check and replace carbon brushes
Replace fuel lines
Overhaul engine (*Note 2)
*Note 1 : Initial oil change should be performed after first twenty (20) hours of operation.
Thereafter change oil every hundred (100) hours.
Before changing oil, check for a suitable way to dispose of old oil.
Do not pour it down into sewage drains, onto garden soil or into open streams.
Your local zoning or environmental regulations will give you more detailed
instructions on proper disposal.
*Note 2 : As to the procedures for these items, please refer to the SERVICE MANUAL or
consult your nearest Makita service dealer.
*Note 3 : More frequent oil changing, oil filter replacement and air cleaner service on
replacement may be necessary depending on operating conditions.
This would include dusty environment, high ambient temperature, heavy engine
loading.
Every 8 Every
hours 20
(Daily) hours
● (Daily)
●
(Refill daily to
upper level)
●
(Initial)
●
(Initial)
− 23−
Every
Every Every
50 200 500
hours hours
hours
(Every 100 hours)
●
●
●
●
●
●
●
●
●
(Every 100 hours)
●
●
●
●
●
●
Every
1000
hours
●
(Yearly)
●