Table of Contents
Advertisement
Chapter 6
Status > System
Status > System
System Status
Firmware Version
The version of the firmware currently
installed is displayed. Firmware can be upgraded from the
Administration > Firmware screen. You must be logged in
with administrator privileges to upgrade the firmware.
MAC Address
This displays the MAC address of the
camera.
Camera Name
This displays the name of the camera, as
defined on the Setup > Basic Setup screen.
Description
This displays the description of the camera,
as defined on the Setup > Basic Setup screen.
Date/Time
This displays the current date/time as
configured on the camera.
Status > Image
Status > Image
MPEG-4
Resolution
This displays the image size of the video
stream.
Business Internet Video Camera with Audio
Advanced Configuration
Image Quality
This displays the image quality of the
video stream.
Frame Rate
This displays the frame rate of the video
stream.
MJPEG
Resolution
This displays the image size of the video
stream.
Image Quality
This displays the image quality of the
video stream.
Frame Rate
This displays the frame rate of the video
stream.
Status > Network
Status > Network
Network
Network Type
This displays the type of network the
camera is connected to.
IP Address
This displays the IP address assigned to the
camera.
Subnet Mask
This displays the subnet mask assigned to
the camera.
Gateway
This displays the IP address of the gateway used
by the camera.
Primary DNS
This displays the IP address of the primary
Domain Name Server used by the camera.
Secondary DNS
This displays the IP address of the
secondary Domain Name Server used by the camera.
Wireless
NOTE:
Wireless information is only found on
the WVC2300 camera.
33
Advertisement
Table of Contents
