Table of Contents
Advertisement
Chapter 5
Recording
This is the Drive and Folder on your PC where
recorded files will be saved. The default location is C:\
Program Files\LinksysOne\LinksysOne Surveillance
Utility\Storage\Local ID\File Type. You can also click the
Browse button to select the desired drive and folder.
Instant Recording Time Limit
Maximum time limit for Instant Recording
the maximum size of a recording. (Recordings are started
by clicking the Record button on the Main screen.)
Motion Detection
Record before Motion Detected
Utility will start recording a certain time before the Utility
detects motion in a Camera's field of view.
Record after Motion Detected
will stop recording a certain time after the Utility detects
motion in a Camera's field of view.
Disk Allocation for Recording
Total Disk Space
This shows the total amount of storage
space on your hard drive.
Available Disk Space
This shows the amount of storage
space available on your hard drive.
Enable Disk Space Limitation
to limit the amount of space your recordings occupy on
your hard drive. Click the box for this feature and then
enter the Maximum Allowed Space in the next box. The
Maximum Allowed Space is the amount of space on your
hard drive you'll allow your recordings to take up, which
should be smaller than the available room you have left
on your drive along with space for your operating system
and other programs. Plan for when that space gets full by
clicking either Overwrite Earliest File, which will delete old
recordings as new ones fill the space, or Stop Recording,
which will end your recording once you fill the space.
Allow a minimum of 300 MB storage space per camera. If
you will be using the same drive that Windows is installed
on to store your recordings, make sure you leave at least
ten percent of available disk space free.
Initial Settings
Launch this Utility when Windows Started
to have this utility start when Windows starts.
Business Internet Video Camera with Audio
Installing and Using the Viewer and Recorder Software
This sets
Set the time so the
Set the time so the Utility
This feature allows you
Check this
Using the Playback Application
Playback
Video Playback
Load Other Cameras
This option allows you to point to a
specific folder to locate video from other cameras.
Select Camera
Select the appropriate camera as defined
within the Monitor.
Recording Methods
There are four recording methods
to choose from:
All Records
Displays all records for the selected
•
Camera.
Select Period
Selecting this option will narrow down
•
the video selections to the range defined within the
start/end date/time fields.
Start Date
Select a starting date from the
–
calendar.
Start Time
Select a starting time using the 24 hr
–
time format.
End Date
Select an ending date from the
–
calendar.
End Time
Select an ending time using the 24 hr
–
time format.
Event Trigger
Selecting this option will limit the
•
video selections to videos that were recorded because
an event occurred.
Input Trigger
Selecting this option will limit the video
•
selections to videos that were recorded because they
were triggered by an input.
Submit
Once all of the video search parameters have
been defined, click this button to obtain your results.
Video Controls
17
Advertisement
Table of Contents
