1. Manuals
  2. Brands
  3. Linksys Manuals
  4. IP Camera
  5. WVC54G-UK
  6. User manual

Linksys WVC54G-UK User Manual

2,4 ghz wireless-g internet video camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
A Division of Cisco Systems, Inc.
2,4
GHz
Wireless-G
802.11g

User Guide

Internet Video Camera
WIRELESS
WVC54G-UK
Model No.

Advertisement

Table of Contents
loading

Related Manuals for Linksys WVC54G-UK

Summary of Contents for Linksys WVC54G-UK

  • Page 1: User Guide

    ® A Division of Cisco Systems, Inc. Wireless-G 802.11g User Guide Internet Video Camera WIRELESS WVC54G-UK Model No.
  • Page 2 Wireless-G Internet Video Camera Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Wireless-G Internet Video Camera Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Wireless Network Introduction Ad-Hoc and Infrastructure Modes Network Layout Chapter 3: Getting to Know the Wireless-G Internet Video Camera Camera LCD Screen and Built-in Microphone Camera LEDs Camera Head Camera Ports...
  • Page 4 Wireless-G Internet Video Camera Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Overview Introduction Setup Wizard for the SoloLink DDNS Service SoloLink Registration of Additional Cameras Chapter 9: Using the Wireless-G Internet Video Camera’s Web-based Utility Overview How to Access the Web-based Utility...
  • Page 5 Wireless-G Internet Video Camera List of Figures Figure 3-1: Camera LCD Screen and Built-in Microphone Figure 3-2: Camera LEDs Figure 3-3: Camera Head Figure 3-4: Camera Ports Figure 4-1: Connect the Ethernet Network Cable Figure 4-2: Connect the Power Adapter Figure 5-1: Setup Wizard - Welcome Screen Figure 5-2: Connection for Setup Screen Figure 5-3: Cameras Found Screen...
  • Page 6 Wireless-G Internet Video Camera Figure 6-6: Setup Complete Screen Figure 6-7: Viewer & Recorder Utility Icon Figure 6-8: Main Screen Figure 6-9: Find Camera from LAN Screen Figure 6-10: Camera Added Successfully Screen Figure 6-11: Find Camera from Internet Screen Figure 6-12: Change Settings Screen Figure 6-13: Delete Camera Screen Figure 6-14: Confirm Deletion of Camera Screen...
  • Page 7 Wireless-G Internet Video Camera Figure 7-11: Registration Summary Screen Figure 7-12: Registration Complete Screen Figure 7-13: Intamac Monitoring with Registered Camera Screen Figure 8-1: SoloLink Access ID Card Figure 8-2: SoloLink Welcome Screen Figure 8-3: SoloLink for Dynamic IP Address Screen Figure 8-4: SoloLink for Convenience Screen Figure 8-5: Check Connections Screen Figure 8-6: Cameras Found Screen...
  • Page 8 Wireless-G Internet Video Camera Figure 9-4: Web Utility Login Screen Figure 9-5: Basic Screen Figure 9-6: Confirmation Screen Figure 9-7: WEP Key Settings Screen Figure 9-8: Image Screen Figure 9-9: Password Screen Figure 9-10: Users Screen Figure 9-11: Add/Modify User Screen Figure 9-12: Intamac Monitoring Screen Figure 9-13: SoloLink DDNS Screen Figure 9-14: New User Registration Screen...

  • Page 9: Chapter 1: Introduction Welcome

    Chapter 1: Introduction Welcome Thank you for choosing the Linksys Wireless-G Internet Video Camera. This Camera sends live video through the Internet to a web browser anywhere in the world! This compact, self-contained unit lets you keep an eye on your home, your kids, your workplace—whatever’s important to you.

  • Page 10: What's In This User Guide

    This chapter discusses the advantages of the Intamac Camera Monitoring Service and walks you through the setup procedure. • Chapter 8: Setting up the Linksys SoloLink™ DDNS Service This chapter discusses the advantages of the SoloLink DDNS Service and walks you through the setup procedure.
  • Page 11 • Appendix H: Regulatory Information This appendix supplies the regulatory information regarding the Camera. • Appendix I: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support. Chapter 1: Introduction What’s in this User Guide?

  • Page 12: Chapter 2: Planning Your Wireless Network

    Wireless-G Internet Video Camera Chapter 2: Planning Your Wireless Network Introduction A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each computer in the WLAN uses a wireless device to connect to the network. Computers and other devices, such as peripherals, in a WLAN share the same frequency channel and SSID, which is an identification name for wireless devices.
  • Page 13 WUSB11 and WUSB54G) for your computers when you want to enjoy USB connectivity. With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at www.linksys.com/international for more information about products that work with the Wireless-G Internet Video Camera.

  • Page 14: Chapter 3: Getting To Know The Wireless-G Internet Video Camera

    Wireless-G Internet Video Camera Chapter 3: Getting to Know the Wireless-G Internet Video Camera Camera LCD Screen and Built-in Microphone The Camera has a LCD screen that indicates the Camera’s current IP address and whether it is a fixed or dynamic address.

  • Page 15: Camera Ports

    Wireless-G Internet Video Camera Camera Ports Figure 3-4: Camera Ports The Camera features three ports and a Reset button on the bottom panel. POWER The POWER port is where you will connect the power adapter. MIC IN The MIC IN port is where you will connect the 2.5 mm input jack of your external microphone (optional).

  • Page 16: Chapter 4: Connecting The Wireless-G Internet Video Camera For Setup

    Proceed to “Chapter 5: Setting up and Mounting the Wireless-G Internet Video Camera.” Connection to a Wireless Ad-Hoc Network for Setup 1. Make sure your computer has the following wireless settings: • SSID - linksys • Network Mode - Ad-Hoc • Channel - 6 •...

  • Page 17: Moving The Camera To A Different Network

    Wireless-G Internet Video Camera 3. Connect the power adapter to the Power port on the Camera. 4. Plug the power adapter into an electrical outlet. The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready and Wireless LEDs are solidly lit.

  • Page 18: Chapter 5: Setting Up And Mounting The Wireless-G Internet Video Camera

    • Intamac Camera Monitoring. Click this button to set up the Intamac Camera Monitoring Service. • Setup SoloLink DDNS Service. Click the Setup SoloLink DDNS Service button to configure and use Linksys’s Dynamic Domain Name System (DDNS) service. • User Guide. Click this button to open the PDF file of this User Guide.

  • Page 19: Figure 5-3: Cameras Found Screen

    Wireless-G Internet Video Camera 4. This screen displays a list of Wireless-G Internet Video Cameras on your network, along with the status information for the Camera whose name is highlighted. In the Selection box, click the name of the Camera you are currently installing.

  • Page 20: Figure 5-6: Network Settings Screen

    Wireless-G Internet Video Camera 7. If your network has a DHCP server, such as a router with DHCP enabled, click the Automatic Configuration- DHCP radio button. If you need to assign a static IP address to the Camera, keep the default setting, Static IP address.

  • Page 21: Figure 5-8: Mode Settings Screen

    Wireless-G Internet Video Camera 9. The Mode Setting screen will appear. Click the Infrastructure radio button if you want the Camera to communicate using an access point or wireless router. Click the Ad-Hoc radio button if you want the Camera to communicate without using an access point or wireless router.

  • Page 22: Figure 5-10: Security Settings Screen

    Passphrase is case-sensitive and should have 16 alphanumeric characters or fewer. It must match the passphrase of your wireless network and is compatible with Linksys wireless products only. (You will have to enter the WEP key(s) manually on any non-Linksys wireless products.) •...

  • Page 23: Figure 5-12: Confirmation Screen

    • Setup SoloLink DDNS Service. Click the Setup SoloLink DDNS Service button to set up and configure the Linksys Dynamic Domain Name System (DDNS) service. • Exit. Click the Exit button if you want to install the Camera’s Utility later.

  • Page 24: Placement Options

    Wireless-G Internet Video Camera Placement Options There are three ways to place the Camera. The first way is to place the Camera horizontally on a surface, so it sits on four small rubber feet. The second way is to stand the Camera vertically on a surface. The third way is to hang the Camera on a wall.

  • Page 25: Chapter 6: Installing And Using The Wireless-G Internet Video Camera Viewer & Recorder Utility

    Utility on your PC. The Utility allows you to easily view and record the Camera’s video. If the Wireless-B Internet Video Camera Viewer & Recorder Utility has already been installed on your PC, Linksys recommends that you uninstall it before you install the Wireless-G Internet Video Camera Viewer & Recorder Utility (this Utility will also work with Wireless-B Internet Video Cameras).

  • Page 26: Figure 6-3: Choose Destination Location Screen

    To set up the Intamac Camera Monitoring Service, go to “Chapter 7: Setting up the Intamac Camera Monitoring Service.” To set up the Linksys SoloLink Service, go to “Chapter 8: Setting up the Linksys SoloLink DDNS Service.” Advanced users: If you want to use the Camera’s Web-based Utility, go to “Chapter 9: Using the Wireless-G Internet Video Camera Web-based Utility.”...

  • Page 27: Using The Viewer & Recorder Utility

    Wireless-G Internet Video Camera Using the Viewer & Recorder Utility After the Viewer & Recorder Utility has been installed, the Viewer & Recorder Utility icon will be displayed in two locations, one on your desktop and one in the system tray of your desktop’s taskbar. There are two ways to open the Viewer &...

  • Page 28: Figure 6-9: Find Camera From Lan Screen

    Wireless-G Internet Video Camera Find To find a Camera on your local network or the Internet, click the Find button. There will be two tabs available, LAN and Internet. The LAN screen shows the Cameras found on your local area network, along with the status information for each Camera.

  • Page 29: Figure 6-11: Find Camera From Internet Screen

    Wireless-G Internet Video Camera Internet The Internet screen shows the Camera found on the Internet, along with the status information for it. Test Results First, go to the Camera Info section. Enter the Camera’s Address, Port Number, and login information (if required). Then click the Test button to find the Camera.

  • Page 30: Figure 6-13: Delete Camera Screen

    Wireless-G Internet Video Camera For the selected Camera, the following information will be displayed: Camera Info Camera Name. The name you gave to the Camera. Description. The information about the Camera that you entered. Address. The Camera’s IP address or your SoloLink DDNS address. Port Number.

  • Page 31: Figure 6-15: View Video Screen

    Wireless-G Internet Video Camera View To view the video seen by a Camera, select the Camera by clicking its name in the Camera List box, and then click the View button. If you want to view video from a different Camera, return to the Utility’s main screen. Select this Camera from the Camera List, and click View.
  • Page 32 Wireless-G Internet Video Camera You may find it helpful to know how much memory is required to hold a video recording. The following tables list estimated bit rates and file sizes for a recording at each available resolution and quality level. The first table shows estimates for a typical video recording, while the second table shows estimates for an audio/video recording.
  • Page 33 Wireless-G Internet Video Camera Estimated Hard-Drive Memory Space Required for Audio/Video Recording per Hour Resolution Quality Level 640 x 480 Very High 640 x 480 High 640 x 480 Normal 640 x 480 640 x 480 Very Low 320 x 240 Very High 320 x 240 High...

  • Page 34: Figure 6-17: Scheduled Recordings In Progress Screen

    Wireless-G Internet Video Camera Scheduled Recordings in Progress From the Scheduled Recordings in progress section, you can schedule recordings, alter the recording preferences, and access recording files. Recordings The recordings listed here are scheduled ones that are currently in progress. Camera Name.

  • Page 35: Figure 6-20: Window Showing Snapshot Folders

    Wireless-G Internet Video Camera Delete To delete a recording file, select it by clicking its Name, and then click the Delete button. Explore If the recording file you want is not listed, click the Explore button to find the file. To rename a recording file, click the Explore button.

  • Page 36: Figure 6-22: Recording Schedule Screen

    Wireless-G Internet Video Camera Schedule To view or modify the recording schedule, click the Schedule button. The Recording Schedule screen shows the current recording schedule and each recording’s information. Camera Name. The name of the Camera. Date. The date of the recording. Time.

  • Page 37: Figure 6-24: Stop Scheduled Recording Screen

    To set up the Intamac Camera Monitoring Service, go to “Chapter 7: Setting up the Intamac Camera Monitoring Service.” To set up the Linksys SoloLink Service, go to “Chapter 8: Setting up the Linksys SoloLink DDNS Service.” If you want to use the Camera’s Web-based Utility, go to “Chapter 9: Using the Wireless-G Internet Video Figure 6-24: Stop Scheduled Recording Screen Camera Web-based Utility.”...

  • Page 38: Chapter 7: Setting Up The Intamac Camera Monitoring Service

    The instructions in this chapter will guide you through the setup needed for use of the Intamac Camera Monitoring Service. For the most current information, visit www.intamac.com/linksys. This website will also describe the free, 30-day trial period available for your Intamac account.

  • Page 39: Figure 7-2: About The Intamac Service Screen

    Wireless-G Internet Video Camera 2. The About the Intamac service screen explains the benefits of using the Linksys Camera(s) and Intamac Camera Monitoring Service to monitor your property. Click the Next button. 3. The 30 Day Free trial offer screen describes the 30-day free trial of the Intamac Camera Monitoring Service.

  • Page 40: Figure 7-4: Confirmation Page Screen

    Wireless-G Internet Video Camera 4. Make sure your network has an active Internet connection. Verify that your PC and Camera are connected to the network and the Camera is configured properly. Click the Next button. 5. The next screen will display a list of Wireless-G Internet Video Cameras on your network and their status information.

  • Page 41: Figure 7-6: Login Screen

    Wireless-G Internet Video Camera 6. To ensure security, you will be asked to enter a user name and password before you can access the Camera. If you have not changed the Camera’s user name and password, then enter admin in the User name and Password fields (admin is the default).

  • Page 42: Figure 7-8: Account Details Screen

    Wireless-G Internet Video Camera 8. Complete the entries on the account details screen. All fields marked with an asterisk are required. NOTE: Your privacy is important to Intamac, which is registered and complies with the legislation of the UK Data Protection Act. If you agree with the terms and conditions of your agreement with Intamac, select I accept.

  • Page 43: Figure 7-10: Login Details Screen

    Wireless-G Internet Video Camera 10. On the login details screen, create a memorable Member ID (user name) and password, which you will use to log in to your Intamac account. Then enter a security question and your answer. The security question and answer will be used to remind you of your password, should you forget it.

  • Page 44: Figure 7-12: Registration Complete Screen

    Log in using your Member ID and password. Then follow the on-screen instructions. Support for the Intamac Camera Monitoring Service, including a complete set of frequently asked questions, can be found at www.intamac.com/linksys. For more information about the Camera’s Web-based Utility, proceed to “Chapter 9: Using the Wireless-G Internet Video Camera Web-based Utility.”...

  • Page 45: Chapter 8: Setting Up The Linksys Sololink™ Ddns Service

    Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Overview This chapter will briefly discuss the Linksys SoloLink DDNS Service, explain how to set up your SoloLink account, and describe how to register additional Cameras on your SoloLink account. You need only one SoloLink account.

  • Page 46: Figure 8-3: Sololink For Dynamic Ip Address Screen

    3. The second screen explains why you would find the SoloLink DDNS Service convenient if you would prefer to access the Camera using a name rather than a series of numbers (its IP address). Click the Next button. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 47: Figure 8-5: Check Connections Screen

    5. This screen will display a list of Wireless-G Internet Video Cameras on your network and their status information. In the Selection box, click the name of the Camera you are currently setting up. Click Next. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 48: Figure 8-7: Login Screen

    7. Your web browser will automatically start up, and the SoloLink DDNS screen of the Camera’s Web-based Utility will appear. Click New User ? - Click here to Register. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 49: Figure 8-9: Confirm Active Internet Connection Screen

    9. On the Welcome to the SoloLink DDNS Service screen, click Set up a NEW Account. Figure 8-10: Welcome to the SoloLink DDNS Service Screen Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 50: Figure 8-11: Sign Up Screen

    Then click Continue. 11. Review your information on the Confirmation screen. If the new settings are correct, click Continue. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service Figure 8-11: Sign Up Screen...

  • Page 51: Figure 8-13: Select A Location Id Screen

    Camera. Click Continue. 13. On the Confirm your Location ID screen, verify that the Location ID is correct. Then click Continue. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 52: Figure 8-15: Verification Screen

    15. On the Create Links screen, click Continue. The SoloLink DDNS Service will send your account information to the Camera. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service Figure 8-15: Verification Screen...

  • Page 53: Figure 8-17: Successful Registration Screen

    17. A confirmation page will display the link or address you will use to access the Camera and the port number the SoloLink DDNS Service will use to find the Camera. Click Continue. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service Setup Wizard for the SoloLink DDNS Service...

  • Page 54: Figure 8-19: Successful Setup Screen

    DDNS Service will be able to access the Camera. 19. Set up port forwarding on your network router, so the SoloLink DDNS Service will be able to track the Wireless-G Internet Video Camera. Go to www.linksys.com/portfwd for instructions on how to configure a Linksys router.

  • Page 55: Sololink Registration Of Additional Cameras

    3. A login screen will appear. (Windows XP users will see a similar screen.) Enter admin (the default user name and password) in the User Name and Password fields. Then click the OK button. Chapter 8: Setting up the Linksys SoloLink™ DDNS Service SoloLink Registration of Additional Cameras...

  • Page 56: Figure 8-23: Sololink Ddns Screen

    SoloLink account. 10. Set up port forwarding on your network router, so the SoloLink DDNS Service will be able to track the Wireless-G Internet Video Camera. Go to www.linksys.com/portfwd for instructions on how to configure a Linksys router. For other routers, refer to your router’s documentation.

  • Page 57: Chapter 9: Using The Wireless-G Internet Video Camera's Web-Based Utility

    • Setup. To alter the Camera’s settings, click the Setup tab. Go to the “Setup” section for more information. • Linksys WEB. To go to the Linksys website, www.linksys.com, click the Linksys WEB tab. • Help. The Help screen allows you to get information about the various Setup screens, download the latest Viewer &...

  • Page 58: Setup

    Wireless-G Internet Video Camera 3. A screen will appear showing you the video from the Camera. NOTE: To view video using a web browser, you must use Internet Explorer version 5.5 or higher. The View Video feature will not work with Netscape. Netscape users should use the Viewer & Recorder Utility instead.

  • Page 59: Figure 9-5: Basic Screen

    Device Settings Firmware Version. The version number of the firmware currently installed is displayed here. Firmware should only be upgraded from the Help screen if you experience problems with the Camera. Visit www.linksys.com to find out if there is updated firmware.

  • Page 60: Figure 9-6: Confirmation Screen

    16 alphanumeric characters. (This Passphrase is compatible with Linksys wireless products only. If you are also using non-Linksys wireless products, you will need to enter your WEP keys manually on those products.) After entering the Passphrase, click the Generate button to create WEP key(s).

  • Page 61: Figure 9-8: Image Screen

    Wireless-G Internet Video Camera Image The Image screen allows you to alter the Camera’s video settings. Video Settings Resolution. Select the resolution you want for viewing or recording the Camera’s video. Select 640*480 for the highest resolution, 320*240 for medium resolution, or 160*120 for the lowest resolution. Image Quality.

  • Page 62: Figure 9-9: Password Screen

    Wireless-G Internet Video Camera NOTE: Video quality and/or performance may be affected by the number of users connected to the Camera. Adjustments Brightness. Select Automatic if you want the Camera to adjust the brightness level automatically. Select Manual if you want to adjust the brightness level on this screen. Then increase or decrease the brightness using the arrow buttons.

  • Page 63: Figure 9-10: Users Screen

    Wireless-G Internet Video Camera Users The Users screen allows you to designate access rights for Camera users. User Access Allow access by. The default is All users. If you keep the default setting, then all users will be allowed to view the Camera’s video.

  • Page 64: Figure 9-12: Intamac Monitoring Screen

    Cameras. For more information about this service, click Find out more about the Intamac service or enter http://www.intamac.com/linksys in the Address field of your web browser. Intamac Intamac Device ID. Displayed here is the Intamac ID number for the Camera.

  • Page 65: Figure 9-13: Sololink Ddns Screen

    Back screen to return to the previous screen. Your web browser will automatically start up, and you will visit a website to set up your SoloLink account. Follow the on-screen instructions. For more information, refer to “Chapter 8: Setting up the Linksys SoloLink DDNS Service,” which will guide you through setup of your SoloLink account.

  • Page 66: Figure 9-15: Password Request Screen

    Wireless-G Internet Video Camera Status Registration Status. The status of the Camera’s registration is displayed here. To use the SoloLink DDNS service for the Camera, it must be registered with your SoloLink DDNS account. Address Update Status. The status of the most recent DDNS service update is displayed here. You will be informed if the username and password authentication has been successful, as well as if the dynamic IP address has been updated.

  • Page 67: Figure 9-18: Find Available Port Screen

    SoloLink account. 6. Set up port forwarding on your network router, so the SoloLink DDNS Service will be able to track the Wireless-G Internet Video Camera. Go to www.linksys.com/portfwd for instructions on how to configure a Linksys router. For other routers, refer to your router’s documentation.

  • Page 68: Figure 9-19: Status Screen

    Status Firmware Version. The version number of the firmware currently installed is displayed here. Firmware should only be upgraded from the Help screen if you experience problems with the Camera. Visit www.linksys.com to find out if there is updated firmware.

  • Page 69: Figure 9-20: Options Screen

    Camera sends captured motion, and make it possible for the Camera to generate alerts more quickly. Linksys recommends that you do not change the Camera’s default settings until you have become familiar with the operation of both the Camera and the monitoring service.

  • Page 70: Help

    Viewer & Recorder Utility from the Linksys website, www.linksys.com/international. Click here to learn how to configure Port Forwarding in your Linksys Router. If you are going to use the SoloLink DDNS Service, you need to set up port forwarding on your router. For instructions on how to configure a Linksys router, click this link.

  • Page 71: Figure 9-22: Upgrade Firmware Screen

    NOTE: When you restore the Camera’s factory defaults, you will lose the settings you have saved previously. Firmware. New firmware versions are posted at www.linksys.com and can be downloaded for free. If the Camera is functioning well, there is no need to download a newer firmware version, unless that version has a new feature that you want to use.

  • Page 72: Appendix A: Troubleshooting

    Wireless-G Internet Video Camera. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com/international. Common Problems and Solutions 1.
  • Page 73 Wireless-G Internet Video Camera 4. I’m not able to play my recording video files. Make sure you have Microsoft Windows Media Player 7 or higher. If you don’t, you can download the latest version from www.microsoft.com. 5. When I view the video, it seems blurry. Adjust the Camera’s focus by rotating its dark gray focus ring.
  • Page 74 If your network uses a dynamic IP address supplied by your ISP, then the IP address you use to reach the Camera will change as well. You need to use the Linksys SoloLink DDNS Service, so you can access the Camera using its domain name while the service keeps track of the IP address changes.

  • Page 75: Frequently Asked Questions

    Wireless-G Internet Video Camera 17. On the Status screen of the Camera’s Web-based Utility, I see this message in the System Log, “NTP server:no server suitable for synchronization found.” This message indicates that the Camera is unable to locate the Network Time Protocol (NTP) server to synchronize its time setting.
  • Page 76 Installation is optional. You can view video using Microsoft Internet Explorer 5.5 or higher. If you don’t want to use the recording function, then you don’t need to install the Viewer and Recorder Utility. Where can I find more information about the Linksys SoloLink DDNS Service? You can go to www.linksys.com/sololink for more information.
  • Page 77 Wireless-G Internet Video Camera What IEEE 802.11g features are supported? The product supports the following IEEE 802.11g functions: • CSMA/CA plus Acknowledge protocol • OFDM protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation • Power Management What is ad-hoc mode? When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to communicate directly with each other.

  • Page 78: Appendix B: Wireless Security

    Wireless-G Internet Video Camera Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation.
  • Page 79 This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network. Change your SSID to something unique and not something related to your company or the networking products you use.

  • Page 80: Appendix C: Upgrading Firmware

    Wireless-G Internet Video Camera Appendix C: Upgrading Firmware NOTE: Linksys recommends that you upgrade the Camera’s firmware within your network; in other words, use a computer within the Camera’s local network. If you attempt to upgrade the Camera’s firmware from a remote location—using a computer outside of the Camera’s local network—the upgrade will fail.

  • Page 81: Appendix D: Windows Help

    Wireless-G Internet Video Camera Appendix D: Windows Help Almost all wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix.

  • Page 82: Appendix E: Glossary

    Wireless-G Internet Video Camera Appendix E: Glossary 802.11a - An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps and an operating frequency of 5GHz. 802.11b - An IEEE wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz.
  • Page 83 Wireless-G Internet Video Camera Buffer - A shared or assigned memory area that is used to support and coordinate different computing and networking activities so one isn't held up by the other. Byte - A unit of data that is usually eight bits long Cable Modem - A device that connects a computer to the cable television network, which in turn connects to the Internet.
  • Page 84 Wireless-G Internet Video Camera DTIM (Delivery Traffic Indication Message) - A message included in data packets that can increase wireless efficiency. Dynamic IP Address - A temporary IP address assigned by a DHCP server. EAP (Extensible Authentication Protocol) - A general authentication protocol used to control network access. Many specific authentication methods work within this framework.
  • Page 85 Wireless-G Internet Video Camera IEEE (The Institute of Electrical and Electronics Engineers) - An independent institute that develops networking standards. Infrastructure - A wireless network that is bridged to a wired network via an access point. IP (Internet Protocol) - A protocol used to send data over a network. IP Address - The address used to identify a computer or device on a network.
  • Page 86 Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online.
  • Page 87 Wireless-G Internet Video Camera Software - Instructions for the computer. A series of instructions that performs a particular task is called a “program”. SOHO (Small Office/Home Office) - Market segment of professionals who work at home or in small offices. SPI (Stateful Packet Inspection) Firewall - A technology that inspects incoming packets of information before allowing them to enter the network.
  • Page 88 Wireless-G Internet Video Camera UDP (User Datagram Protocol) - A network protocol for transmitting data that does not require acknowledgement from the recipient of the data that is sent. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network.

  • Page 89: Appendix F: Specifications

    Wireless-G Internet Video Camera Appendix F: Specifications Standards IEEE 8011.b, IEEE 802.11g, IEEE 802.3, 802.3u Ports One 10/100 Auto Crossover (MDI/MDI-X) port, Power port, 2,5mm MIC IN Protocols TCP/IP, HTTP, DHCP, NTP, SMTP, UPnP (Discovery only) Button One Reset Button Cabling Type RJ-45 Indicators...
  • Page 90 Wireless-G Internet Video Camera Record File Format Brightness Auto/Manual Adjustment Audio G.726 8K Dimensions 85 mm x 155 mm x 80 mm (W x H x D) (3,35" x 6,10" x 3,15") Unit Weight 0,24 kg (8,5 oz.) Power 5V DC, External Certifications Operating Temp.

  • Page 91: Appendix G: Warranty Information

    Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser.

  • Page 92: Appendix H: Regulatory Information

    Wireless-G Internet Video Camera Appendix H: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 93 Wireless-G Internet Video Camera Compliance Information for 2.4-GHz Wireless Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Declaration of Conformity with Regard to the EU Directive 1995/5/EC (R&TTE Directive) Appendix H: Regulatory Information...
  • Page 94 Safety: EN 60950 CE Marking For the Linksys Wireless-B and Wireless-G products, the following CE mark, notified body number (where applicable), and class 2 identifier are added to the equipment. Check the CE label on the product to find out which notified body was involved during the assessment.
  • Page 95 Wireless-G Internet Video Camera This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/ CE) sans aucune limitation, excepté...
  • Page 96 This product is designed for indoor usage only. Outdoor usage is not recommended. This product is designed for use with the included integral or external (dedicated) antenna(s). Use of non- dedicated or third-party antenna(s) is not recommended and is not supported by Linksys. Power Output of Your Device To comply with your country’s regulations, you may have to change the power output of your wireless device.
  • Page 97 7. Click the type of documentation you want. The document will automatically open in PDF format. Note: If you have questions regarding the compliance of these products or you cannot find the information you are looking for, please contact your local sales office. Visit http://www.linksys.com/international for more details. Appendix H: Regulatory Information...

  • Page 98: Appendix I: Contact Information

    Appendix I: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com...

Table of Contents