Table of Contents
Advertisement
Chapter 6
NOTE:
Higher video quality settings and higher
frame rate settings require more bandwidth.
Refer to the Appendix titled "Bandwidth Usage"
for additional details.
MPEG-4 Settings
Resolution
Select the desired video resolution setting.
The default resolution is set to 320x240.
Video Quality Control
Choose one of the following:
Constant Bit Rate
Select the desired fix bit rate. The
•
default bit rate is set to 256 Kbps.
Fix Quality
Select the desired fix quality. The default
•
fix quality is set to Normal.
Max Frame Rate
Select the desired maximum frame rate.
The default maximum frame rate is set to 30 fps.
MJPEG Settings
Resolution
Select the desired video resolution format.
The default resolution is set to 320x240.
Fixed Video Quality
Select the desired fix quality. The
default fix quality is set to Normal.
Frame Rate Control
Select the desired frame rate. The
default frame rate is set to Auto.
Mobile Settings
Enable Mobile Streaming
the mobile devices by selecting this option.
Resolution
The default resolution is set to 160x120.
•
Video Quality Control
•
following options:
Constant Bit Rate
Select the desired fix bit rate.
–
The default bit rate is set to 32 Kbps.
Fix Quality
Select the desired fix quality. The
–
default fix quality is set to Normal.
Max Frame Rate
Select the desired maximum frame
•
rate. The default maximum frame rate is set to 15 fps.
Access Code
Enter a code to use to access the live video
•
from the Camera through cell phone connection.
Video Adjustments
Power Line Frequency
Select the power line frequency
(50Hz or 60Hz) used in your region, to improve the picture
quality under fluorescent lighting.
White Balance
Select the suitable white balance option
as you desired.
Business Internet Video Camera with Audio
Enable streaming video for
Choose from one of the
Advanced Configuration
Brightness
If necessary, you can adjust the brightness to
obtain a better image. For example, if the camera is facing
a bright light, the image may be too dark. In this case, you
can increase the brightness.
Sharpness
Select the desired option for the sharpness.
You can select a sharpness value between -3 and 3.
Contrast
Select the desired option for the contrast. You
can select a contrast value between -3 and 3.
Options
Enable Time Stamp
If you want to display a time stamp
on the video, enable this feature by checking the check
box.
Enable Text Display
If you want to display text on the
video, enable this feature by checking the check box. The
text can be up to 20 characters in length. This feature is
often used to identify the Camera location when multiple
Cameras are installed.
Enable Image Overlay
If you want to display an image
on the video, enable this feature by checking the check
box.
Linksys Logo
This option will display a Linksys
•
logo on top of the video. Positioning of the logo is
determined by the x and y coordinates defined in the
Image Position fields. Be sure not to define a position
that is outside of the defined resolution.
User Defined Image
This option allows you to upload
•
a bitmap image file (smaller than 64Kb).
Image Position
The Image Position fields allow you
•
to define the coordinates of the Linksys logo or user
defined image. The upper left corner value is 0, 0.
Increasing the X value (X: 0 - 639) will move the image
to the right. Increasing the Y value (Y: 0 - 479) will move
the image down.
NOTE:
Select values within the range of the
selected image resolution.
26
Advertisement
Table of Contents
