Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Brake mechanism (cont.)
DISASSEMBLING
(5) Disassemble Brake mechanism as drawn in Fig. 11.
Fig. 11
1. Remove Bearing housing from Gear housing.
Note: Be sure that Link plate complete is in
"Saw chain brake activated" position.
(See step 4 in Fig. 10).
If not, set the Link plate to that position
by gripping it with a water pump pliers.
2. Using 1R003, pinch the hook of Link plate complete and the rib of Bearing housing to free Link plate
from Bearing housing.
3. Link plate complete section can now be disassembled
by prying it up with a slotted screwdriver.
Slotted screwdriver
Hook of Link plate complete
for hooking Brake band
Compression spring 9
Link plate complete
Link plate complete
"Chain brake activated" position
Bearing housing
Gear housing
Rib of Bearing housing
1R003
4. Remove Brake band from the opposite side of
Bearing housing by unscrewing 4x12 Tapping
screw.
P 9/ 13
4x12 Tapping screw
Flat washer 4
Brake band
Advertisement
