Toro 30381N Operator's Manual page 18

Figure 31
22. Adjust the floor jack to a suitable height to install the
center tire. Lift the center of the track enough to install
the center tire. Torque the lug nuts to 88 to 115 N-m
(65 to 85 ft-lb).
Figure 32
23. Lower the floor jack until the front wheels support the
frame. Install the flat washers (1/2 inch) and locknuts
on the bogie pivot stud (Figure 29) and torque to 102
N-m (75 ft-lb).
Note: You may need to move the floor jack to the rear
bumper to raise the rear of the machine high enough to
install the flat washer and locknut.
24. Install the side access covers with the screws previously
removed (Figure 33).
1. Access covers
25. Install the winter frame floor plate cover to the floor
with the screws previously removed (Figure 34).
1. Floor plate cover
26. Connect the cab pressure and return hoses to the quick
couplers on the rear frame mount (Figure 35).
18
Figure 33
Figure 34
2. Mounting screws