Pair With A Honeywell Vehicle Mount Computer - Honeywell 8670 Quick Start Manual

1. Set your mobile computer so it searches for other Bluetooth
devices. (Refer to your device's User's Guide for pairing
instructions.)
2. Scan the BT Connection - PDA/Mobility Systems Device
bar code below. 
BT Connection - PDA/Mobility Systems Device

If the bar code above does not pair your mobile computer
with the ring scanner, scan the following bar code.
3. Once your mobile computer has located the scanner, select
the 8670 ring scanner name from the list displayed.
Note: Select the serial number that is shown on the ring
scanner, not on the battery module.
4. If a PIN is requested, enter 1234 (the default).
Your mobile computer should now be paired with the ring scan-
ner and be able to accept incoming data from the 8670.

Pair with a Honeywell Vehicle Mount Computer

The 8670 ring scanner can pair with Honeywell vehicle mount
computers, such as the Thor VM1 or VM2, or with Tecton
mobile computers.
Use the ring scanner to scan the EZPairing bar code that is
either supplied with the device, attached to the device, or dis-
played on the screen. The EZPairing bar code begins with
LnkB followed by 10 digits. Your vehicle mount computer
should now be paired with the ring scanner and be able to
accept incoming data from the 8670.
Non-Base BT Connection