Using The Honeywell Hyperion 1300G Scanner; Connecting The Scanner With Usb; Barcode Reading Techniques; Figure 1: Correct And Incorrect Scanning - Honeywell Hyperion 1300G User Manual

SPO

Using the Honeywell Hyperion 1300G scanner

1
1.1

Connecting the scanner with USB

Connect one end of the interface cable to the scanner (1), and the
other end to the USB port of your personal computer (2). The scanner
emulates the operation of a keyboard.
Replacing the USB cable:
If the USB cable needs replacing, insert a straightened paperclip through the
small hole on the side of the scanner's handle to release the connector.
1.2

Barcode reading techniques

The scanner has a bright red aiming beam. The aiming beam should be centred horizontally over
the bar code.
Correct
© IZUM, 19. 3. 2019, SPO-NA-EN-373, V1.0
Incorrect

Figure 1: Correct and incorrect scanning

Honeywell Hyperion 1300G Scanner User Guide
1
2
Incorrect
1/6