Table of Contents
Advertisement
Performance Tests
Performance tests are intended to test various DaqBook functions with the current device
configuration. These tests give quantitative results for each supported functional group.
The results represent maximum rates at which the various operations can be performed.
These rates depend on the selected parallel port protocol and will vary according to port
hardware capabilities.
•
ADC FIFO Input Speed
from the DaqBook's internal ADC FIFO to computer memory through the parallel
port. Results are given in samples/second, where a sample (2 bytes in length)
represents a single A/D value.
•
Digital I/O Input Speed
transferred from the DaqBook's Digital I/O ports to computer memory through the
parallel port. Results are given in bytes/second.
•
Digital I/O Output Speed
transferred from the computer's memory to the DaqBook's Digital I/O ports through the
parallel port. Results are given in bytes/second.
Reference Note: If you experience difficulties, please refer to other sections of this manual and to the additional
user documentation before calling technical support. User documentation is included on your data acquisition CD,
and is installed automatically as a part of product support, when your software is installed. The default location is
in the Programs directory.
Note that hardcopy versions of the manuals can be ordered from the factory.
2-6
Setup and Startup
– tests the maximum rate at which data can be transferred
– tests the maximum rate at which DIO input data can be
– tests the maximum
rate at which DIO output data can be
10-29-02
Test Hardware Tab
Test Results
OMB-DaqBook User's Manual
Advertisement
Table of Contents
