Install Software And Product Support Documentation - Omega Engineering 100/200 Series User Manual

If connecting your DaqBook to a notebook PC,
you can use a WBK20A, PCMCIA Interface Card.
Refer to separate instructions (supplied with the
WBK20A) if applicable.
WBK20A Interface Card

(4) Install Software and Product Support Documentation

1.
Remove
Programs feature.
2. Place the Data Acquisition CD into the CD-ROM drive. Wait for PC to auto-run the CD. This may
take a few moments, depending on your PC. If the CD does not auto-run, use the Desktop's
Start/Run/Browse feature.
3. After the intro-screen appears, follow the screen prompts.
Upon completing the software installation, continue with step 5, Test Hardware.
2-4 Setup and Startup
Reference Note: It is possible to use a VDC power source other than an AC-to-DC adapter.
Both the DBK Basics document module (included in this manual) and the DBK Option Cards
and Modules User's Manual contain power-related information. The DBK manual is installed
on your hard drive during software installation. The default location is the Programs
directory.
previous version Daq drivers, if present. You can do this through Microsoft's Add/Remove
If connecting your DaqBook to a desktop PC (with no
available EPP port), you can use a WBK21 Interface
card. Refer to separate instructions (supplied with the
WBK21) if applicable.
WBK21 Interface Card
10-29-02
OMB-DaqBook User's Manual