Vigor2925Vac / Vigor2925Vn-Plus - Draytek Vigor2925 Quick Start Manual

3 . 3 V i g o r 2 9 2 5
3 . 3 V i g o r 2 9 2
LED Status
ACT Blinking
(Activity)
Off
WAN1~ On
WAN2
Off
Blinking
Line On
Off
USB On
Blinking
Phone1/2 On
Off
Blinking
On
2.4G/5G
Blinking
LED on Connector
Left LED
WAN1~WAN2
Right LED
Left LED
LAN1~LAN5
Right LED
V a c / V i g o r 2
5 V a c / V i g o r 2
Explanation
The router is powered on and running normally.
The router is powered off.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
A PSTN phone call comes (in and out). However, when the
phone call is disconnected, the LED will be off.
There is no PSTN phone call.
USB device is connected and ready for use.
The data is transmitting.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
A phone call comes.
Wireless access point with transmission rate of 2.4G is
ready.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and simultaneously when
WPS is working, and will return to normal condition after
two minutes. (You need to setup WPS within 2 minutes.)
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
9 2 5 V n - p l u s
9 2 5 V n - p l u s
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
13