Viewing Profile Information - Samsung SNV-L6013R User Manual

setup screen
To restore the backup settings
1. To restore the backup settings, click [restore].
2. Select a backup file and click [open].
If you perform the backup or restoration, the web browser will be
`
M
closed and the camera will reboots.
If you try to recover the config file backed up in other model, some
`
functions may malfunction and you need to change the setting
manually.
Log
You can check the system log or event log.
1. From the Setup menu, select the <System (
2. Click <Log>.
3. Select a log type.
• System : You can check the system logs where any system
changes are recorded including the time information.
• Event : You can check the event logs including the time
information.
4. From the right log list, select an item to search for.
• If you select <All> in the top left dropdown list, all logs for
the applicable log type will be displayed.
5. If one page can not display all the logs available, use the bottom buttons to move to the previous, next, or
the last item.
6. Click on the <Backup> button to save all the log data for the currently selected mode (system, event) in
the "time stamp value create by camera in modelname-mode-camera.txt file" in the download folder for
the browser.
If you want to view the details of a log, click [Info (
`
M
the bottom pane.
Each page displays 15 logs with the latest one displayed at the top.
`
The event/system log list can contain up to 1000 logs; after that, the existing logs will be deleted from the oldest one each
`
time a new log is created.
44_ setup screen
)> tab.
) ] in the right column of the log; the log information will be shown in

viewinG profiLe informATion

profile access
You can check the profile information.
1. Click [Status ( )] on the live screen.
2. The profile information screen is displayed.
• Profile access : Show the information of the newly added
profile.
- Profile : Show the information of the newly added
codec.
- Bitrate(kbps) : Show both the actual bit rate and the set
bit rate.
- Framerate(fps) : Show both the actual frame rate and
the set frame rate.
- ATC(%) : Show the ATC status.
- Concurrent users count : Show the number of concurrent users who access the profile.
• Current users : Shows information on users accessing web viewer and displaying monitoring video.
- Profile : Show the name of the profile accessed by the user.
- Bitrate(kbps) : Show the current bit rate.
- Network connection status : It shows whether the network is working fine.
- IP : Show the IP address of the current user.
To check information on the profile currently used, click [Status (
`
M
It takes a certain time for any changes to be applied.
)] again to refresh it.