Makita EM2650UH Original Instruction Manual page 20

Alternative draining method
Remove oil cap, tilt Petrol Brushcutter toward oil filler hole, and drain out oil.
Collect oil in container.
5) Set the engine level, and gradually fill up to upper limit mark with new oil.
6) After filling, tightly secure oil cap, so that it will not loosen and cause leaks.
If oil cap is not tightly secured, it may leak.
POINTS ON OIL
– Never discard replaced engine oil in garbage, earth or sewage ditch. Disposal of oil is regulated by law. In disposal, always follow the
relevant laws and regulations. For any points remaining unknown, contact Authorized Service Agent.
– Oil will deteriorate even when it is kept unused. Perform inspection and replacement at regular intervals (replace with new oil every 6
months).
Internal stepped
section (upper
limit)
Internal stepped
section (lower
limit)
Upper limit mark
20
External mark
(upper limit)
External mark
(lower limit)
Oil