Configuring Router Settings - Motorola AP-51 series Product Reference Manual

2. Within the WIPS Status
radio is servicing its coverage area as a typical access point or as a WIPS sensor.
Selecting the
the enabled
NOTE The AP-51x1 radios are dual band capable radios. When selected as a
3. Define a primary and alternate WIPS server IP Address within the
WIPS Server 2
This is the address of the WIPS console server.
4. Click Apply to save any changes to the WIPS screen. Navigating away from the screen
without clicking Apply results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the WIPS screen to the last saved configuration.
6. Click Logout
logout before the applet is closed.

5.5 Configuring Router Settings

The access point router uses routing tables and protocols to forward data packets from one network
to another. The access point router manages traffic within the network, and directs traffic from the
WAN to destinations on the access point managed LAN. Use the access point
the router's connected routes. To access the Router screen.
1. Select Network Configuration
field, define whether the access point's 802.11a or 802.11b/g
disabled radio button defines the radio as a typical access point. Selecting
radio button defines the radio as a WIPS sensor.
WIPS sensor these radios scan both the 2.4 GHz and 5 GHz bands.
fields.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point applet. A prompt displays confirming the
-> Router from the access point menu tree.
Netw ork Configuration
WIPS Server 1 and
Router screen to view
5-67