• Infinite lease time must be configured for the static reservations
• CPEs WAN interface IP must be assigned via DHCP
• All CPEs under an AP must have their WAN IP on the same subnet as the AP's
wireless interface.
6.3 Configuring AP IP Settings
Log into the AP Gui via a web browser
Go to General IP Configuration
The two entries for Wireless and Wired will be pre‐configured from the factory
Select Wireless and then Wired and in each case choose DHCP client to "enable"
mode. Hit "update"
Top right corner hit the disc icon to save the configuration. The disc changes to
blue indicating that a configuration save is required
Following the configuration save, the icon to the right will change to yellow
indicating that a reboot is required. Hit the icon to reboot the radio.
Configure the DHCP server address in the DHCP Relay configuration
Go to Configuration DHCP Server DHCP Relay
Enter the external DHCP server IP address
Enter the Relay Maximum Wait time and Relay number of Retries
IP Interface Configuration
44