Indication Lamp - Makita BUK360 Instruction Manual

1
2
012931
Bend the cord of the battery converter BCV01 over the
product attachment section. Then run the cord of the
BCV01 through the slit in the lower housing and close the
battery hood.
To remove the BCV01, follow the installation procedure
in reverse.
BCV02 (optional accessory)
012934
Open the battery hood and click in the BCV02 into the
battery port. Close the battery hood.
To remove the BCV02, press on the hook of the BCV02
and withdraw it with both hands.

Indication lamp

WARNING:
Do not use the battery selection switch during the
•
operation.
After flipping the battery selection switch, the main
•
switch is turned off. To start the tool, the operator
needs to press the main switch.
1. Battery hood
2. Product
mounting
4
adapter of the
BCV01
3. Cord
4. Slit in the lower
housing
3
1. Battery
converter
(BCV02)
1
4
1. Indication lamps
2. Battery lamp 1
3. Battery lamp 2
4. Warning lamp
5. Battery selection switch
012839
1
1 2
012937
You can switch the battery by flipping the battery
selection switch when the tool is equipped two batteries.
(The indication lamps shows the status No.1 or No.6.)
If the tool is equipped one battery, flip the battery button
to chose one side which the battery is equipped.
If the tool is equipped one battery and you switch to
•
a battery port in which no battery cartridge is
mounted, the indication lamps shows the status
No.2 or No.5.
8
2
3 4 5
3
1
5
2
6