Specifications - Makita BUK360 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Standard battery cartridge and charger
Always keep the combinations of battery/charger on the right columns.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Keep away from the rotating part.
Remove the lock key before inspecting,
adjusting, cleaning, servicing, leaving
and storing the equipment.
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Model
Dimensions
Blade diameter
Tilling width
No load speed
Net weight
Rated voltage
BL3626
DC36RA
END019-1
Noise
The typical A-weighted noise level determined according
to 2000/14/EC:
Sound pressure level (L
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN709:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
BUK360/UK360D
1,193 mm x 488 mm x 998 mm
245 mm
350 mm (225 mm separated)
-1
85 min
23.3 kg
D.C. 36 V
) : 70 dB(A) or less
pA
Wear ear protection
) : 2.5 m/s
h
2
BL3622A
DC36WA
ENG905-1
ENG900-1
2
or less
ENG901-1