Makita BUK360 Instruction Manual page 4

6. Start the motor
manufacturer instructions and with feet well
away from the tool(s).
7. Do not put your hands or feet near or under
rotating parts.
8. Never pick up or carry a machine while the
motor is running.
9. Switch off the equipment and remove the lock
key in the cases below:
whenever
unattended,
before clearing blockages.
10. Pay particular attention on hard or stony field
because the machine tends to be much less
stable than on cultivated ground and use slow
speed for ploughing.
Maintenance and storage
1. Before storing the machine in a confined or
closed place, let it cool down for a sufficient
period of time.
2. Keep all nuts, bolts and screws tight to ensure
the equipment is in safe working condition.
3. To reduce the fire hazard, keep the motor,
battery compartment and storage area free of
vegetative material and excessive grease.
4. Switch off the equipment and remove the lock
key in the cases below:
before checking, cleaning or working on
the machine,
after striking a foreign object. Inspect the
machine for damage and make repairs
before restarting
machine,
if the machine starts to vibrate abnormally.
Inspect for damage and replace or repair
any damaged parts. Check for and tighten
any loose parts.
Battery tool use and care
5. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
6. Use power tools
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
7. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
8. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
carefully according
you leave the
and operating
only with specifically
to liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Service
9. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
10. Follow
machine changing accessories.
11. Keep handles dry, clean and free from oil and
grease.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
the
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical
attention right away. It may result in loss of
your eyesight.
5. Do not short the battery cartridge:
(1)
(2)
(3)
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 C (122 F).
4
instruction for
Do not touch the terminals with any
conductive material.
Avoid storing battery cartridge in a
container with other metal objects such as
nails, coins, etc.
Do not expose battery cartridge to water
or rain.
lubricating and
ENC007-7