[Video 1] Tab - Sony HVO-500MD Instructions For Use Manual

[Save to]
Select the selection state of recorded data when you
specify [Save to] for the [Operation] box.
The default setting is [Deselect All].
[Print]
Select the selection state of recorded data when you
specify [Print] for the [Operation] box.
The default setting is [Deselect All].

[Video 1] Tab

Configure recording settings.
1
Use the B and b buttons to select the [Video 1] tab.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Region]
Select [NTSC] or [PAL] in the setting screen that
appears, and press the ENTER button.
The default setting is [NTSC].
[I/O Timing]
Select the input and output timing in the setting screen
that appears, and press the ENTER button.
Select [Normal] as signal processing is usually
performed under normal circumstances. There will be
a slight delay in signal outputs when [Normal] is
selected. Select [Pass-Through] for simultaneous input
and output timing without signal processing.
The default setting is [Normal].
[Auto Live Still Image]
Select the type of image to display when a video is
paused in the setting screen that appears, and press the
ENTER button.
The default setting is [Frame].
73
Function Settings