Honeywell ADEMCO LYNXR-ISIA Installation And Setup Manual page 23

✻ Secondary Phone No.
42
Enter up to 24 digits.
All four digits of the Subscriber Account number must be entered in Fields ✻ 43 and ✻ 44. If ten-digit format is selected
in ✻ 48 (option 5), all ten digits of the Subscriber Account number must be entered.
✻ ✻
Fields 43 and 44:
✻
Enter [ ] as the fourth digit if a 3-digit account number (for 3+1 dialer reporting format) is used. Enter 0 as the first
digit of a 4-digit account number for Nos. 0000–0999. Enter [
CID®) is used. Exit field by pressing [
blank Programming Form for examples of account number entries. If using the paging feature, do not enter a leading 0
in the subscriber account number, and do not use digits A-F anywhere in the number. Some paging systems provide
voice mail capability, which is activated by a leading 0 in the message. Enter digits 0–9; # +11=B; # +12=C; # +13=D; #
+14=E; or # +15=F.
Primary Subs Account No.
✻
43
Enter a four or ten digit account number.
Secondary Subs Account No.
✻
44
Enter a four or ten digit account number.
Field 46: Enter up to 24 digits. Do not fill unused spaces. Enter 0-9, #+11 for '*'; #+12 for'#'; #+13 for a pause (2 seconds).
"Follow Me Reminder" Phone Number
✻
46
Enter up to 24 digits.
✻ Phone System Select
47
Central
Station Pulse
No 0 = No
WATS Speaker
Phone
Call Wait
Cancel
Disabled
WATS 2 = No
Speaker
Phone
Call Wait
Cancel
Disabled
No 8 = No
WATS Speaker
Phone
Call Wait
Cancel
Enabled
WATS 10 = No
Speaker
Phone
Call Wait
Cancel
Enabled
✻
] if only 3 digits are used. To clear entries from field, press
Dialing Mode
Tone Pulse Tone
1 = No 4 = With 5 = With
Speaker Speaker Speaker
Phone Phone Phone
Call Wait Call Wait Call Wait
Cancel Cancel Cancel
Disabled Disabled Disabled
3 = No 6 = With 7 = With
Speaker Speaker Speaker
Phone Phone Phone
Call Wait Call Wait Call Wait
Cancel Cancel Cancel
Disabled Disabled Disabled
9 = No 12 = with 13 = With
Speaker Speaker Speaker
Phone Phone Phone
Call Wait Call Wait Call Wait
Cancel Cancel Cancel
Enabled Enabled Enabled
11 = No 14 = With 15 = With
Speaker Speaker Speaker
Phone Phone Phone
Call Wait Call Wait Call Wait
Cancel Cancel Cancel
Enabled Enabled Enabled
- 23 -
LYNXR-ISIA Installation and Setup Guide
Data Field Descriptions
If fewer than 24 digits entered, exit by pressing [ ✻ ]. To clear
entries from field, press ✻ 42 ✻ . See backup reporting note for
field ✻ 41. If using the paging feature, enter the pager phone
number here.
✻
] as the fifth digit if a 4-digit account number (for 3+1,
Enter the primary subscriber account number.
To clear entries from field, press ✻ 43 ✻ .
Enter the secondary subscriber account number.
To clear entries from field, press ✻ 44 ✻ .
This option allows the user to schedule a time driven message.
When activated the system will dial the phone number
programmed and deliver a voice message (custom words 72, 73
and 74). This option is only supported when the pager or follow
me feature is enabled in field ✻ 49 (option 6-9 or 10-13).
If using the Follow Me Reminder feature, enter the phone number
here. If fewer than 24 digits are entered, exit by pressing [ ✻ ]. To
clear entries from the field press ✻ 46 ✻ .
The telephone message can be terminated (acknowledged) by
pressing any key on the telephone keypad. Pressing any key on
the local LYNXR-ISIA keypad will terminate (acknowledge) both
the follow me and the local reminder announcements.
Note: The follow me reminder announcement will be terminated if
any other event requires the system to dial out or if an
audible alarm has occurred.
This option is used to enter the correct type of phone dialing (pulse or tone),
and to select the correct WATS line option for the Central Station. It is also
to activate the Speaker Phone option and to disable call waiting.
Call waiting warning tones can interfere with Central stations reporting.
The Call Waiting Cancel option should be selected if the reporting phone
line has call waiting service. The Call Waiting Cancel command must also
be programmed in Field *40. If the Call Waiting Cancel feature is enabled,
make sure to enter Call Waiting Cancel command in Field *40. The
command depends on a telephone service provider.
Important Note: If Call Wait Cancel is disabled in Field ✻47, and Call
Waiting Disable command is entered in Field ✻40, this
will prevent successful communication to the central
station when used on a non-call waiting line.
Notes: (1) PABX number and operation of the control panel with a PBX
system cannot be used if the Call Waiting Cancel option has
been enabled in Field ✻47.
(2) If using pulse dialing, you must enter the numbers slowly in
order to allow the pulse dialer time to operate.
✻ ✻ ✻ ✻
or
43 44 . See