Advertisement
3. Follow the steps onscreen to discover the access points and review
the discovery results.
4. Select Access Point > Discovery > Managed AP List. Add the
access points that you want to be managed by the wireless controller
to the Managed AP List.
While the access points are being converted from standalone mode to
managed mode, the following occurs:
•
The wireless controller pushes management firmware onto the
access points.
•
The access points become DHCP clients and receive an IP address
from either the DHCP server in your network or the DHCP server
on the wireless controller.
•
The profiles that you have configured on the wireless controller
are pushed onto the access points.
Note:
For extensive information about the Discovery Wizard and the
discovery process, see the reference manual.
10
Advertisement
