Advertisement
Package Contents
•
Wireless controller
•
Ethernet cable
•
One or more power cords (varies by region)
•
Rack-mounting hardware
•
Installation guide (this document)
Connect Power
WARNING: DO NOT place equipment in tight spaces or in drawers. Be sure
that your equipment is surrounded by at least 5 cm (2 inches) of air space.
Before deploying the wireless controller, we recommend that you set up
and test the device.
1. Plug the wireless controller into a power outlet.
2. Check the LEDs on the wireless controller.
The following table describes the behavior of the wireless controller LEDs.
3
Advertisement
