Section 7 - Application Guide; Mono 4-Way W/ Two Aux Zones - dbx 260 User Manual

DriveRack
SECTION 7 – APPLICATION GUIDE
This Application guide section is provided to offer suggested installation applications of the DriveRack 260 that will
allow you to optimize peak performance of the processor. Note that the six included applications represent the extensive
flexibility of the DriveRack units. These applications can be used verbatim, or as sample reference guide templates for
designing countless audio applications.

7.1 Mono 4-Way w/ Two Aux Zones

Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack.
2. Connect the outputs of the DriveRack and run to the selected speaker amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
4. Make connections between the Zone Controllers (see Section 6.2 "ZC-Zone Controllers") and the 260.
Software
1. Select a program (Factory: 2x4 w/ 2 Zones) as a template.
2. Load the program by pressing the PROG/CONFIG button.
3. Adjust the individual parameters for the system by pressing the Processing Module buttons.
4. Using the Utility Menu, select the ID for each ZC-1 and ZC-2 Zone Controller and program its output level boost
and cut parameters.
2
JBL AE Series
AC2215/64
JBL AE Series
ASB 6128
®
Left Right
3 4
Application Guide
5
dbx ZC-1
JBL Control 26C
Ceiling Speaker
Zone A
Lobby
DriveRack® 260 User Manual
Section 7
dbx ZC-2
JBL Control 26C
Ceiling Speaker
Zone B
Cry Room
55