Makita 9015DB Technical Information page 3

R
epair
(1) Replacing of armature
1) Remove the wheel stone and the wheel cover, respectively.
2) Remove the carbon brush.
3) Disconnect the tapping screw PT5x30(4 pieces)for mounting the gear housing and motor housing and then
remove the armature.
1
1) Remove the wheel stone and the wheel cover, respectively.
2) Remove the tapping screw CT5 x16(4 pieces) for mounting the bearing box.
3) The spiral bevel gear 33 is inserted in the spindle. Disassemble it in a way shown below.
*To assemble the gear housing and gear housing cover on the motor housing, set in a way that un-processed edge
face on the gear housing cover faces screw side of the spindle.
(2) Replacing of the spiral bevel gear 33
1) Remove the wheel stone and the wheel cover, respectively.
2) Remove the tapping screw CT5x16(4 pieces) for mounting the bearing box.
3) The spiral bevel gear 33 is inserted in the spindle. Disassemble it in a way shown below.
2
3
6
5
10
11
19
4
7
12
20
18
8
9
13
14
15