Remote Control Ipod Operation; Alarm Clock Features; Setting The Alarm Time; Turning Alarms On Or Off - Horizon Fitness Trio Owner's Manual

E
N
G
L

Remote Control iPod Operation

I
S
H
Press the
1
pause the CD.

Alarm Clock Features

The Horizon Trio has two independent alarm settings. Each can have its own type of alarm —wake to tone, wake to music
or both. Both types of alarms start at a low volume level that gently increases. In addition you can set the alarms to work
every day, weekdays only or weekends only.

Setting the Alarm Time

Press and hold the
1
or "Alarm2 Setup" menu.
Turn the
2
time highlight box will flash.
Turn the
3
Alarm Time.
notes: The Alarm Setup menu can also be by accessed using the
Setup Options menu then selecting Alarm 1 or Alarm 2 .
If an alarm source other than the CD player is selected, the CD Track # line of the display will show NA rather than a
track number.
The other setting are adjusted the same way: access the "Alarm Setup" menu; turn the
adjust, then press the control; turn the
active Days: weekdays/weekends/7Days – Choose which days you want to use the alarm.
source – Choose the wake to music source you want. You can select a station you have tuned in with the AM, FM1 or
FM2 sources, any of the AM or FM presets, a CD, or your iPod connected via the HRD-i docking adapter. note: If you
select a source that is not available, for example if you select a CD source and there is no disc loaded, a wake to tone
alarms sound instead.
cD track# – If you select a CD for the wake to music source, use this setting to select the track to play.
volume – Set the volume for wake to music.
After you have completed the alarm setup turn the
control. Or just wait a few seconds and the menu will "time out" and store the settings.

Turning Alarms On or Off

Press the Alarm 1 or Alarm 2 buttons to turn the alarm on or off and set the alarm type. One
press selects wake to music XXX. A second press selects wake to tone XXX. A third press
selects both. Press the button a fourth time to cancel the alarm. When an alarm is turned on
you'll see one or both alarm indicators in the lower corners of the display showing the alarm
time and type.
This example shows the display with the Trio turned off and both alarm on. The current time is displayed. Alarm 1 is set for
wake to tone at 6:45 AM. Alarm 2 is set for wake to music and tone at 7:15 AM.
10
>,
button to play or
2
or button for one second to access the "Alarm1 Setup"
alarM 1 alarM 2
control to highlight "Alarm Time", then press the control to select it. The
MODe
or control to adjust the Alarm Time, then press the control to set the
MODe tune
or
MODe
]
Press the button once to
skip to the next track. Press the
[
button once to return to the
beginning of the current track or
twice to go to the previous track.
control to select the
MODe
to adjust the setting, then press the control.
tune
control to highlight "Exit" (below Volume) and press the
or
MODe tune
[ ]
Press and hold the or
3
button to start fast forward or
rewind.
control to select the item to
MODe