Factory Default Configuration - NETGEAR DGN3500 User Manual

N300 Wireless Gigabit ADSL2+ Mode m Router DGN3500 User Manual

Factory Default Configuration

You can use the Restore Factory Settings button on the rear panel of the wireless modem
router to return its configuration to the factory settings. This is called a hard reset. To perform
a hard reset, press and hold the Restore Factory Settings button until the LEDs flash. Your
wireless modem router restarts and returns to the factory configuration settings shown in the
following table.
Feature
Login
Modem Router user login URL
User name (case-sensitive)
Login password (case-sensitive)
ReadyShare Access
Internet Connection
WAN MAC address
WAN MTU size
Port speed
Local Network (LAN)
LAN IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
Default Behavior
http://www.routerlongin.com
admin
password
\\readyshare
Use default address
1500
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
Appendix A: T echnical Specifications