Specifications; Ec Declaration Of Conformity - Makita FS2200 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock ring
2-1. Locator
3-1. Locator
4-1. Switch trigger
4-2. Lock button
5-1. Lamp

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model FS2300
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Explanation of general view
6-1. Reversing switch lever
7-1. Hook
8-1. Lock ring
8-2. Gear housing
9-1. Locator
9-2. Bit
Model
Self drilling screw
Drywall screw
-1
)
Overall length
Net weight
Safety class
) : 83 dB(A)
pA
) : 94 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
FS2200
6 mm
5 mm
0 - 2,500
287 mm
1.6 kg
ENE033-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENF002-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG102-2

EC Declaration of Conformity

We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Drywall Screwdriver
Model No./ Type: FS2300
ENG204-2
are of series production and
Conforms to the following European Directives:
sum)
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
ENG901-1
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
3
9-3. Gear housing
10-1. Swells
10-2. Trapezoidal holes
10-3. Locator holder
FS2300
0 - 2,500
290 mm
/II
Corporation as the
6 mm
5 mm
1.6 kg
ENH101-12
responsible