Honeywell 51370B Manal page 11

Venting continued-
Single Wall Polypropylene venting systems that are listed on the Bradford
White website are approved for use in the water heaters covered in this
instruction manual. The venting system components are ULC S636
approved and listed by a recognized agency and may be installed in the U.S.
and Canada. Complete instructions for the approved venting systems can
be found on the Bradford White website, bradfordwhite.com or by calling the
Technical Service Department at: 800-334-3393.
The approved polypropylene venting system Instruction Supplement
listed on the Bradford White website for each manufacturer's venting
system must be carefully read and followed by a qualified installer.
Failure to properly install the vent system may result in property
damage, personal injury, or death.
For installations in Canada, field supplied vent piping must comply with
CAN/CGA B149.1 (latest edition) and be certified to the Standard For Type
BH, Class II, 65°C, Gas Venting Systems, ULC S636. Components of this
listed system shall not be interchanged with other vent systems or unlisted
pipe/fittings. All components and specified primers and cements of the
certified vent system must be from a single system manufacturer and not
intermixed with other system manufacturer's vent system parts. The
supplied vent connector and vent termination are certified under ULC S636
and are also certified as part of the water heater. Refer to the following
tables for approved venting materials, primers, and cements. All approved
primers and cements are to be used within their marked time limitations.
NOTICE
WARNING
NOTICE
11