NETGEAR WIRELESS-G ROUTER WGR614V10 Reference Manual page 48

b. Time of Day to Block. Select a start and end time in 24-hour format. Select All Day for
24-hour blocking.
c. Time Zone.
Select the time zone where you are located, and if you prefer to automatically adjust for
daylight savings time.
Note: Accurate time zone and daylight savings settings will assure that the
The Wireless-G Router uses the Network Time Protocol (NTP) to obtain the current time
and date from one of several network time servers on the Internet. To localize the time for
your log entries, you must specify your time zone:
• Time Zone. Select your local time zone. This setting is used for the blocking schedule
and for time-stamping log entries.
• Automatically Adjust for Daylight Savings Time. Select this check box if your
region supports daylight savings time. The router will automatically adjust the time at
the start and end of the daylight savings time period.
3. Click Apply to save your settings.
Restricting Access From Your Network
scheduling and logging functions operate correctly.
v1.0, February 2010
Wireless-G Router WGR614v10 Reference Manual
3-6