Configuring Wep Wireless Security - NETGEAR RangeMax Next Wireless Router WNR834B WNR834B WNR834B User Manual

with the correct Passphrase. Similarly, when you use WPA2-PSK, the other devices in the
network will not connect unless they are also set to WPA2-PSK and are configured with
the correct Passphrase.
Use the procedures described in the following sections to configure the WNR834B. Store this
information in a safe place.

Configuring WEP Wireless Security

To configure WEP data encryption, follow these steps:
Note: If you use a wireless computer to configure WEP settings, you will be disconnected
when you click Apply. You must then either configure your wireless adapter to
match the wireless router WEP settings or access the wireless router from a wired
computer to make any further changes.
1. From the main menu of the browser interface, under Setup, click Wireless Settings.
2. From the Security Options menu, select WEP. The WEP options display.
3. Select the Authentication Type and Encryption strength.
Safeguarding Your Network
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
v2.1, July 2007
2-7